Update on Teh Car

EZ MONEY · 05-06-2009, 02:00 AM

Just got a e-mail today.. My car is sitting over at Coastal Dyno and Sam just looked it over. I will be having
Mac 2.5 inch Stainless Steel Catback with 3.5 inch tips
UPR Off- Road X Pipe
SubFrame Connectors
H&R Sport Lowering Springs
BilletFlow Cobra IRS Brace
AFCO Pro-Series Heat Exchanger
Complete Coastal Dyno Tune.

Cant wait to get the stuff put on, tuned and see what kind of numbers its making. Ive been keeping my eye out over on SVTP and have seen some good deals on Steggy ported Eatons so I might pick one up and install it while Im on leave along with a Accufab Throttle Body.
Also when Sam was going over the car he said it had a lower pulley along with a JDM 3.00 pulley so it should be putting down some good boost.

ReLoaDeD BuLLiTT · 05-06-2009, 02:02 AM

Hate that exhaust, but congrats man. Must be excited.

When are you moving back to the states to enjoy this car?

EZ MONEY · 05-06-2009, 02:06 AM

Quote:

Originally Posted by ReLoaDeD BuLLiTT

Hate that exhaust, but congrats man. Must be excited.

When are you moving back to the states to enjoy this car?

Hate how the exhaust tips look on it but I plan on adding some Bassani tips in the future.
Ill be home for 2 weeks at the end of may so Im having them ship the car to my parents house so I can drive it and then when I get back from this deployment I will have the car shipped to my house in Hawaii.

carguy1985 · 05-06-2009, 02:09 AM

Congrats bro, i love my mac catback

YouTube

ReLoaDeD BuLLiTT · 05-06-2009, 02:18 AM

Quote:

Originally Posted by Termin8U

Hate how the exhaust tips look on it but I plan on adding some Bassani tips in the future.
Ill be home for 2 weeks at the end of may so Im having them ship the car to my parents house so I can drive it and then when I get back from this deployment I will have the car shipped to my house in Hawaii.

sorry, I misread your post, I thought for some reason it said magnapacks...

mac/flowmaster/chambered mufflers FTW imo.

good choice. love the sound. although I would have gone with a prochamber personally.

EZ MONEY · 05-06-2009, 01:37 PM

Also there will be a Video up on Youtube of the Dyno run... Big thanks to Brandon and Sam!

Edmund · 05-06-2009, 01:57 PM

Quote:

Originally Posted by ReLoaDeD BuLLiTT

sorry, I misread your post, I thought for some reason it said magnapacks...

mac/flowmaster/chambered mufflers FTW imo.

good choice. love the sound. although I would have gone with a prochamber personally.

My car has the Mac long tubes,Mac ProChamber and flowmasters with the factory rolled tips,I'm actually getting tired of the sound,Planning on replacing everything from the ProChamber on back with a Lethal Performance off-road x-pipe and either SLP louthmouth cat-back or Magnapack catback.I am even considering 3in non-mandrel bent custom stainless cat-back exhuast with spintech mufflers.

ReLoaDeD BuLLiTT · 05-06-2009, 02:01 PM

Quote:

Originally Posted by Edmund

My car has the Mac long tubes,Mac ProChamber and flowmasters with the factory rolled tips,I'm actually getting tired of the sound,Planning on replacing everything from the ProChamber on back with a Lethal Performance off-road x-pipe and either SLP louthmouth cat-back or Magnapack catback.I am even considering 3in non-mandrel bent custom stainless cat-back exhuast with spintech mufflers.

only thing somewhat annoying about chambered mufflers is "drone". If you don't daily your vehicle that's fine with most, even some that do.

Hate the raspy sound of straight through mufflers. Had magnacrap on my turbo mustang and it sounded like doo doo

Edmund · 05-06-2009, 02:04 PM

I personally love that high pitch crackle sound you get with resenators on hard exelaration

AXUM · 05-06-2009, 02:08 PM

Sounds like things are coming together... love the sound of Mac exhaust.

micachu · 05-06-2009, 05:37 PM

Mac FTMFW!!

I love the sound of an uncatted Pro Chamber with the Mac Flowpath's behind it. It's just loud, rowdy and nasty!

360Rocket · 05-06-2009, 05:40 PM

You don't need a Steggy port, Sam can do the port for you. You'll be pleased with the work done and the outcome. I had the Mangapacs and dumped them for the Spintechs and a MAC O/R prochamber.

twisted · 05-07-2009, 01:59 PM

Car is clean, I saw it when I was there yesterday.

Edmund · 05-07-2009, 02:03 PM

Quote:

Originally Posted by 360Rocket

You don't need a Steggy port, Sam can do the port for you. You'll be pleased with the work done and the outcome. I had the Mangapacs and dumped them for the Spintechs and a MAC O/R prochamber.

How does it sound with the spintechs on it?

Predatorbird · 05-07-2009, 02:44 PM

I'm running the Mac/UPR combo and I love it.

360Rocket · 05-07-2009, 03:05 PM

Quote:

Originally Posted by Edmund

How does it sound with the spintechs on it?

videos below:

StreetFire

StreetFire

StreetFire

StreetFire

EZ MONEY · 05-07-2009, 03:34 PM

Quote:

Originally Posted by twisted

Car is clean, I saw it when I was there yesterday.

Cant wait to get it home

Quote:

Originally Posted by 360Rocket

videos below:

http://videos.streetfire.net/video/N...-on_108704.htm

http://videos.streetfire.net/video/S...-in_108713.htm

http://videos.streetfire.net/video/R...s-I_108714.htm

http://videos.streetfire.net/video/3...-on_117300.htm

That sounds good!

ShakinIt · 05-08-2009, 01:58 AM

Quote:

Originally Posted by carguy1985

Congrats bro, i love my mac catback

http://www.youtube.com/watch?v=_TlnzZ73bms&fmt=22

Dude, how did you hold the camera out the window, steer and shift all at the same time???

Quote:

Originally Posted by 360Rocket

videos below:

http://videos.streetfire.net/video/N...-on_108704.htm

http://videos.streetfire.net/video/S...-in_108713.htm

http://videos.streetfire.net/video/R...s-I_108714.htm

http://videos.streetfire.net/video/3...-on_117300.htm

Fucking sexytime right thurr!!!

EZ MONEY · 05-22-2009, 02:40 AM

update: Sam didnt have any S/S Mac catback so he threw on a Bassani S/S Catback (Bassani was actually my first choice but I wanted to be a cheap ass and just settle for Mac LOL).
Also got some IRS Bushings on it.

Cant wait to see what it puts down on the dyno!

360Rocket · 05-22-2009, 09:30 AM

Car drives really nice! Don't know if you aware of this but when we drop our cars off to get work done, Sam will toss us the keys to your car as a "loaner" while our junk is being worked on. Steering pulls to the left a bit, but overall, a very nice purchase on your part.

05-06-2009, 02:00 AM	#1
EZ MONEY KING OF THE STREETS Join Date: Jan 2006 Location: Honolulu,Hawaii Posts: 7,231	Update on Teh Car Just got a e-mail today.. My car is sitting over at Coastal Dyno and Sam just looked it over. I will be having Mac 2.5 inch Stainless Steel Catback with 3.5 inch tips UPR Off- Road X Pipe SubFrame Connectors H&R Sport Lowering Springs BilletFlow Cobra IRS Brace AFCO Pro-Series Heat Exchanger Complete Coastal Dyno Tune. Cant wait to get the stuff put on, tuned and see what kind of numbers its making. Ive been keeping my eye out over on SVTP and have seen some good deals on Steggy ported Eatons so I might pick one up and install it while Im on leave along with a Accufab Throttle Body. Also when Sam was going over the car he said it had a lower pulley along with a JDM 3.00 pulley so it should be putting down some good boost. __________________ 2004 KB COBRA

05-06-2009, 02:02 AM	#2
ReLoaDeD BuLLiTT Site Sponsor Join Date: Jan 2006 Location: Loxahatchee, FL Posts: 17,844	Hate that exhaust, but congrats man. Must be excited. When are you moving back to the states to enjoy this car? __________________

05-06-2009, 01:37 PM	#6
EZ MONEY KING OF THE STREETS Join Date: Jan 2006 Location: Honolulu,Hawaii Posts: 7,231	Also there will be a Video up on Youtube of the Dyno run... Big thanks to Brandon and Sam! __________________ 2004 KB COBRA

05-06-2009, 02:04 PM	#9
Edmund Senior Member Join Date: Aug 2008 Location: Palm Beach Gardens,FL Posts: 1,396	I personally love that high pitch crackle sound you get with resenators on hard exelaration __________________

05-06-2009, 05:37 PM	#11
micachu Senior Member Join Date: Jun 2007 Location: North Carolina Posts: 3,883	Mac FTMFW!! I love the sound of an uncatted Pro Chamber with the Mac Flowpath's behind it. It's just loud, rowdy and nasty! __________________ 'If there be any truth in the remark, the crisis at which we are arrived may with propriety be regarded as the era in which that decision is to be made; and a wrong election of the part we shall act may, in this view, deserve to be considered as the general misfortune of mankind." -Alexander Hamilton

05-06-2009, 02:08 PM	#10
AXUM Lift Strong Join Date: May 2006 Location: Larkspur, CO Posts: 4,973	Sounds like things are coming together... love the sound of Mac exhaust.

05-06-2009, 05:40 PM	#12
360Rocket Senior Member Join Date: Dec 2005 Location: Tampa Posts: 3,381	You don't need a Steggy port, Sam can do the port for you. You'll be pleased with the work done and the outcome. I had the Mangapacs and dumped them for the Spintechs and a MAC O/R prochamber. __________________ 2004 Roush Cobra #04-9705 1 of 5 .............................................1977 Pontiac Pro Street Bandit Trans Am. http://www.myspace.com/360Rocket

05-07-2009, 01:59 PM	#13
twisted dusty garage queen Join Date: Jul 2004 Location: FL gulf coast Posts: 8,257	Car is clean, I saw it when I was there yesterday. __________________ SBR Last edited by twisted; 05-07-2009 at 02:37 PM.

05-07-2009, 02:44 PM	#15
Predatorbird Senior Member Join Date: Nov 2008 Location: Sarasota, FL Posts: 141	I'm running the Mac/UPR combo and I love it. __________________ 1999 Cobra - Rio Red

05-22-2009, 02:40 AM	#19
EZ MONEY KING OF THE STREETS Join Date: Jan 2006 Location: Honolulu,Hawaii Posts: 7,231	update: Sam didnt have any S/S Mac catback so he threw on a Bassani S/S Catback (Bassani was actually my first choice but I wanted to be a cheap ass and just settle for Mac LOL). Also got some IRS Bushings on it. Cant wait to see what it puts down on the dyno! __________________ 2004 KB COBRA

05-22-2009, 09:30 AM	#20
360Rocket Senior Member Join Date: Dec 2005 Location: Tampa Posts: 3,381	Car drives really nice! Don't know if you aware of this but when we drop our cars off to get work done, Sam will toss us the keys to your car as a "loaner" while our junk is being worked on. Steering pulls to the left a bit, but overall, a very nice purchase on your part. __________________ 2004 Roush Cobra #04-9705 1 of 5 .............................................1977 Pontiac Pro Street Bandit Trans Am. http://www.myspace.com/360Rocket

Currently Active Users Viewing This Thread: 1 (0 members and 1 guests)

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode